Customers compare TASR7KS02 to these similar products
Products Featured in this Video
Today we're going to be taking a look at, then we'll show you to install the Timbren Axle-less Trailer Suspension System. These are available in multiple configurations to fit most applications. Just check our website out for details. Today specifically we're going to be using part number ASR3500S05. This is a spindle only configuration for 3,500 pound axles. With the spindle only configuration… see more >
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Hey Mike as long as your 2018 Primetime Lacrosse has 3 inch diameter axles the Roadmaster Comfort Ride part #RM-2460-2560 is going to fit and work great.
view full answer...If you happened to have enough ground clearance you could go with a straight axle but you would be losing about 4 inches of clearance between the tires. I attached a link to both styles of 3,500 lb axles we carry as well.
view full answer...Yes we can get over or under slung axles. It would be very similar to the Dexter Idler Trailer Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs part #20545I-EZ-60-10 but you would have them custom make it with the…
view full answer...To run a charge line to your battery you will first need to install a 7-Way on your trailer. This can be done using the Epicord 7-Way Molded Trailer Plug with Junction Box #277-000141. The Black wire in the junction box is the one that will carry the…
view full answer...If the diameter of your axle was 3 inches the kit part #K71-385-00 would work to allow you to move the springs in relation to the axle. Based on the size of the trailer you'd most likely have a smaller diameter axle like 2-3/8 inch like what the…
view full answer...The Toyota 6 lug bolt pattern is the same 6 bolt pattern that trailers use of 6 on 5.5 inch so what you wanting to accomplish with a Timbren Axle Less setup is possible. The part #ASR3500S06 is the best option as it has a 4 inch lift built into it.…
view full answer...To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…
view full answer...We do! It looks like you're needing the Rhino-Rack Recovery Track Carrier for Pioneer Platform Rack #RR43159-RMTXMPS which is exactly what you're asking about.
view full answer...Off road tires tend to have a more aggressive tread pattern and can be wider/taller. Generally speaking most all trailer tires are regular tires. There are some turf tires and off road tires out there that would fall into this category but if you are…
view full answer...Hey Jaime, yes you can replace your 25-1/4 inch 3,500 lb axle leaf springs with a 5k rated axle spring like the part #e44SR. This will increase the suspension's weight capacity and might make the ride quality a little rougher but it would fit and…
view full answer...Welcome back! The charge wizard included with the Progressive Dynamics RV Power Control Center item #PD4135K is only compatible with Lead Acid AGM batteries so once it's in lithium mode the charge wizard can be ignored or removed from the panel.…
view full answer...If you have the Ford 3" hitch then you can definitely add it but, yes it would change the weight capacity. The TorkLift Cannon Hitch Extension item #TLE1636 only has a 3,600 lbs towing capacity and a 360 lbs maximum tongue weight. If used with a…
view full answer...