Customers compare C17499 to these similar products
Products Featured in this Video
Speaker 1: inaudible 00:00:01 Speaker 2: Today, we're taking a look at the CURT TruTrack Weight Distribution System with integrated sway control. Now this system is designed to evenly distribute weight over the axles of your tow vehicle and trailer. It offers improved stability and control, and ultimately, it creates a more level ride for both the tow vehicle and the trailer.It… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Pertaining to the Reese Pro Round Bar Weight Distribution Hitch #RE34FR, the head itself without a ball is about 20 lbs. The shank is about 25 lbs. The ball itself would be 3 lbs. Each spring bar is about 12 lbs apiece.
view full answer...I spoke with my contact at Curt regarding the Curt TruTrack Weight Distribution System #C17499 that you are installing on your trailer. He said that you can install the support brackets 6 to 6-1/2 inches from the end of the spring bar without…
view full answer...When it comes to choosing between the Curt TruTrack Weight Distribution System w/ Sway Control #C17499 and the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control #EQ37100ET you'll want to take a couple of things into…
view full answer...Yes, the Reese Dual Cam II Weight Distribution System #RP65FR is a great option for your 2023 Grand Design Imagine XLS 22RBE. To attach it to your 2019 Ford F-250 you will need a Shank #RP69FR and Reducer Sleeve #C45408 to go from the 3"…
view full answer...The Grand Design Imagine XLS 17MKE weighs in at 6,395 lbs fully loaded so for an appropriately sized weight distribution system, I recommend the Reese Pro Round Bar Weight Distribution part #RE94FR which is rated for up to 8,000 lbs. This system…
view full answer...We aren't manufacturers of those parts, and we don't have the testing ability in house, so I reached out to a couple of our manufacturers to see what information they could provide to try and help. I reached out to my contact at Curt…
view full answer...The only difference between the Demco Channel Tongue Trailer Coupler part #12564 and Demco Channel Tongue Trailer Coupler part #DM12717 is the bolt pattern which is just slightly different with one having an extra hole.
view full answer...In regards to an electric over hydraulic actuator, the 1,000 psi model is for drum brakes and the 1,200 psi model is for disc brakes. The size of the axle, etc. are not factors. The most popular option we offer is the HydraStar Vented Marine Electric…
view full answer...Porpoising (bouncing like you described) and sway are both commonly caused by the same thing when towing and that is not enough tongue weight for the trailer relative to the total amount of weight the trailer weighs. You need the tongue weight to be…
view full answer...When using the Curt TruTrack Weight Distribution System w/ Sway Control #C17499, which is a great system for your trailer weight and vehicle, you will initially setup your system just like you would a ball mount. So you will measure from level ground…
view full answer...The Curt #C17499 TruTrack is a great system, but it could rated a bit higher than what you actually need (depending on your actual as-towed trailer tongue weight). The system is designed for trailers with a fully loaded and ready to tow tongue weight…
view full answer...Yes, the cam of the Reese Dual Cam III part #RP65FR has been upgraded from models that were made 20 years ago. The brackets have also been upgraded and made to be a lot easier to install as well.
view full answer...